Programming software built for Swiss-type lathes and turn-mill centers, with process synchronization and precision toolpaths that cut Swiss lathe programming time by 60-70% over manual G-code.
PartMaker programs Swiss-type lathes and turn-mill centers the way Swiss programmers actually work, with live tooling, B-axis milling, and automatic process synchronization for parts that demand tight tolerances and clean cycles.
Precision toolpaths built around the way Swiss lathes actually run, with fine control over guide bushing and sub-spindle operations that general-purpose CAM treats as an afterthought.
Wait and queue codes get inserted into your NC programs automatically, keeping main and sub-spindle operations timed correctly without hand-editing G-code.
Program turning, milling, and drilling in a single setup, with clear handling of live tooling that keeps complex turn-mill parts accurate from first cut to last.
5-axis positioning with 3+2 tool tilt, plus simultaneous swarfing for contoured surfaces that a 3-axis setup can't reach in one pass.
Raster, offset, and other 3D machining strategies handle contoured and freeform geometry on parts that mix turning with complex milled features.
Verify toolpaths and check for collisions against your actual machine setup before it ever reaches the shop floor.
| Best for | Swiss-type lathe and multi-axis turn-mill programming for medical device and precision small-part machining |
|---|---|
| Platforms | Windows desktop |
| Included | Bundled with a FeatureCAM Ultimate subscription, alongside Fusion, Fusion Team, and HSMWorks |
| File format | Native format, plus STEP, IGES, and Parasolid import |
| Licensing | Included with FeatureCAM Ultimate, annual or multi-year subscription |
| From DSI | Deployment help, certified training, and local technical support included |
Get PartMaker through DSI, an Autodesk Platinum Partner, as part of a FeatureCAM Ultimate subscription. Get deployment help, certified training, and support from specialists who program Swiss lathes for a living.
No. PartMaker comes as part of a FeatureCAM Ultimate subscription from DSI, alongside Fusion, Fusion Team, and HSMWorks. There is no standalone PartMaker license, but you can use PartMaker, FeatureCAM, or both from the same subscription.
FeatureCAM covers general milling and turning across a wide range of machines. PartMaker is built specifically for Swiss-type lathes and turn-mill centers, with guide bushing control, sub-spindle handling, and process synchronization tuned to how Swiss programmers actually work.
Small, precise, high-mix parts: medical device components, surgical instruments, connectors, and other work that runs on Swiss-type lathes or turn-mill centers in limited quantities with tight tolerances.
Either. A FeatureCAM Ultimate subscription includes both, so you can program a job in PartMaker, FeatureCAM, or move between them depending on which fits the part better.
Autodesk cites a 60-70% reduction in Swiss lathe programming time compared to hand-written G-code, mainly from automatic process synchronization and precision toolpaths built around Swiss-specific operations.
Talk to a DSI specialist about PartMaker licensing, bundles, and training built around how your team works.